New Projector in 319 Walker Building

October 3, 2005

Note: Use the remote to turn on the projector, not the buttons on the projector. The remote only works from the front or back of the projector. You may obtain the remote from 302 Walker Building.

The Projector has four modes:

1. Off
In this mode the power light is red, the status light is off and the fan is off.

2. Cool down
Power light is red, status light blinks green and the fan is on.

3. Warm up
Power light is green, status light blinks green and fan is on.

4. On
Power light is green and status light is green and fan is on.

To turn on the projector you must point the remote at the front or back of the projector and press the power button once. When the projector is turned on it will briefly enter warm up mode.

To turn the projector off you must press the power button twice, and when the projector is turned off it will enter cool down mode.

Warm up mode should only last thirty seconds to a minute, but cool down mode will last until the lamp cools off. The projector will not respond to the remote or the buttons on the projector during warm up or cool down mode. If the projector is accidentally turned off too soon it cannot be turned back on until it cools down.